Aerodynamics



What is aerodynamics? The word comes from two Greek words: aerios, concerning the air, and dynamis, which means force. Aerodynamics is the study of forces and the resulting motion of objects moving through a fluid in particular, air. Judging from the story of Daedalus and Icarus, it can be seen that humans were eager to reach for the skies. Knowledge of aerodynamics is necessary for the design of safe and efficient flying machines. Aerodynamics as a field came into existence only at the dawn of the 19th century owing to the pioneering work of Ludwig Prantl, Theodore Van Karman, Sir Arthur Cayley and others. Up to this time it was studied under the fluid mechanics discipline.

It is a highly mathematical discipline which describes the motion of bodies by using differential equations, complex numbers and other basic principles of physics. Lift generated by the wing of an aircraft, a beach ball thrown near the shore, design of cars and buildings and many more phenomenon in nature can be explained with the help of this knowledge.

Objectives
This course is planned as a graduate-level aerodynamics course for mechanical engineers planning to have focus on thermo and fluid dynamics. By the end of this course, the students are expected

1. To get acquainted with the following fluid flow phenomena.
 * laminar and turbulent flows
 * subsonic, transonic, supersonic and hypersonic flows
 * shock and expansion waves
 * separated flows
 * boundary layer flows

2. To classify different phenomenon of aerodynamics based on non-dimensional parameters, scaling laws, and observed effects.

3. To have a theoretical understanding of incompressible, compressible, inviscid and viscous aerodynamics. This will be achieved by giving the mathematical fundamentals of integral and differential modeling of fluid flows for the conservation laws of mass, momentum, and energy. Simplification and solution of those equations for special flow states in aerodynamical flows.

4. To apply fluid mechanics and aerodynamics knowledge on the evaluation, design, and optimization of flow devices.

Moreover, students have the chance to see the direct application of the content in the research and development work conducted by the lecturer.

Prerequisites
The prerequisites of this course are The following courses will be also helpful
 * Fluid mechanics
 * Thermodynamics
 * Algorithms and programming
 * Partial differential equations
 * Computer aided methods in mechanical engineering

Motivation of studying this aerodynamics course
Aerodynamics is a fundamental subject of aerospace and mechanical engineering and partially chemical, civil and medical engineering. As a matter of fact, it is a field where multiple physical effects can be met. Aerodynamic drag of transport vehicles, lift and drag characteristics of flying vehicles, performance of compressors and turbines, combustion chambers are applied examples, where aerodynamics plays a very important role. Knowledge on aerodynamics certainly help us to develop new flow devices and processes related with flow of gasses. Furthermore, application of the approaches of aerodynamics in other research subjects might be beneficial.

Basic components of the course
This course is dominnatly a theoretical one. However, examples are provided in the form of visual media and laboratory experiments. Exercises are made and homeworks are given so that students get acquainted to the theoretical systematic in aerodynamics. In the last part of the course, relevant examples of research work are provided.

Chapters & Contents
The following chapters will be covered in this graduate level aerodynamics course. One unit lecture is 45 min. The course consists of 30 units of lecture material and 30 units of tutorial and laboratory exercises.

1.Introduction and motivation (1 unit)

2.Phenomena in aerodynamics (2 units) 3.Integral and differential analysis of fluid flows (4 units,repitition) 4.Governing equations of aerodynamics, thermodynamics and boundary conditions (4 units) 5.Inviscid and incompressible external flows: Low speed flows over airfoils and wings (4 units) 6.Inviscid and compressible flows (7 units) 7.Viscous flows (6 units)
 * Compressibility
 * Laminar, turbulent and transitional flows
 * Boundary and shear layers
 * Separated flows
 * Shock waves
 * Lift, drag and viscous losses
 * Reynolds transport theorem
 * Conservation of mass, momentum and energy in integral form
 * Derivation of continuity, Navier-Stokes and energy equations
 * Non-dimensional form of continuity, Navier-Stokes and energy equations
 * Euler equation, Bernoulli equation, Potential flow equations (incompressible and linearized-compressible), mechanical energy equation (for isothermal flows)
 * Basic thermodynamical relations for an ideal gas.
 * Potential flows
 * Flow over airfoils: The numerical vortex panel method
 * Flow over wings: Lifting-surface theory and the numerical vortex lattice method
 * Normal, oblique and expansion waves
 * Flow over airfoils and wings
 * Subsonic flow
 * Transonic flow
 * Supersonic flow
 * Flows through nozzles and diffusers
 * Boundary layer concept
 * Concept of fully-developed flow
 * Fundamental aspects of turbulent flows
 * Flow over a flat plate, a cyclinder and an airfoil
 * Laminar and turbulent internal flows and jet flows

8.Examples of contemporary studies (2 units)

Appendix 1. Scalars, Vectors and Tensors

Appendix 2. Dimensional Analysis

Appendix 3. Analytical solutions of internal flows

The course ends with a summary of the complete course material and a discussion on the red line of examination questions.

Homework

 * Derivation of continuity and Navier-Stokes equations and simplification of the equation system for different flow cases
 * Derivation of Betz's law for horizontal axis wind turbines
 * Development of a vortex-panel method for the calculation of a lifting flow over an airfoil
 * Simulation of a flow around an airfoil at subsonic, transonic and supersonic speeds
 * Design of a convergent divergent nozzle for required supersonic conditions at the exit

Laboratory exercises and demonstrations

 * Flow visualization around blunt bodies (airfoil, square and circular cylinders)
 * Simulation of a flow around an airfoil at subsonic, transonic and supersonic speeds
 * Chocked nozzle-flow experiment


 * Round jet experiment
 * Excursion to various wind-tunnels

Important Links

 * List of fluid mechanics sources in wikipedia
 * Yet another list of fluid mechanics sources in wikipedia
 * Visual flow courses filmed in 1960’s by very renowned scientists, which were made publicly available by M.I.T.
 * Gallery of fluid motion by Physics of Fluids (don’t forget to visit the archive)
 * Numerical fluid mechanics sources prepared by computational fluid dynamics community
 * NASA Cultural resources: Video records research and documentation
 * Potential flow analysis tool for airfoils

Literature

 * Anderson, J.D.: "Fundamentals of Aerodynamics", Mcgraw Hill Series in Aeronautical and Aerospace Engineering,2010.
 * Anderson, J.D.: "Modern Compressible Flow: With Historical Perspective", Mcgraw Hill Series in Aeronautical and Aerospace Engineering,2002.
 * Anderson, J.D.: "Hypersonic and High-Temperature Gas Dynamics", Second Edition (AIAA Education), 2006.
 * Aris, R:"Vectors, Tensors and the Basic Equations of Fluid Mechanics", Dover Books on Mathematics, 1990.
 * Ashley, H. and Landahl, M.: "Aerodynamics of Wings and Bodies",Dover Books on Aeronautical Engineering,1985.
 * Durst, F.: “Grundlagen der Strömungsmechanik: Eine Einführung in die Theorie der Strömung von Fluiden“, Springer, 2006.
 * Durst, F.: "Fluid Mechanics: An Introduction to the Theory of Fluid Flows",Springer, 2010.
 * Fox, R.W. and McDonald, A.T.:“Introduction to Fluid Mechanics”, John Willey and Sons.
 * Munson, B.R., Young, D.F., and Okiishi,T.H., Huebsch, W.W.: “Fundamentals of Fluid Mechanics”, John Willey and Sons.
 * Pozrikidis, C.: "Fluid Dynamics: Theory, Computation and Numerical Simulation", Springer, 2009.
 * Schlichting, H. and Gersten, K.: "Boundary-Layer Theory", Springer, 2000.
 * Schlichting, H. and Truckenbrodt, E.A.: "Aerodynamik des Flugzeuges: Teil 1 und Teil 2", Springer, 2000.
 * Spurk, J. and Aksel, N.:“Strömungslehre: Einführung in die Theorie der Strömungen“, Springer,2010.
 * Spurk, J. and Aksel, N.:“Fluid Mechanics“, Springer, 2008.
 * White, F.:“Fluid Mechanics“, McGraw-Hill Series in Mechanical Engineering,2010.
 * White, F.:"Viscous Fluid Flow", McGraw-Hill Mechanical Engineering, 2005.