Arduino/wifi/setup/Arduino Blink



Before hooking the diamondback arduino wifi board into a computer, get into device manager. This way you can watch if it successfully finds a device driver.

Get into device manager by pressing windows start, and then into the search box type "device manager".

Then press enter. Look for the Ports (COM & LPT).

Then connect the diamondback arudino wifi to the computer through usb cable. The device manager window will blick several times and go through the installation of at least two drivers before settling down.

The next step is to fire up the Arduino IDE (integrated development environment) and send the blink program to the arduino.