BrislteBot Model 4: Version 3

Starting Point

 * Get a feel for visual conception by looking at the Previously Improved BristleBot Model 4 7. Improved BristleBot Model 4.jpg
 * Derive its features but improve upon them 5v3._Finished_Version_3.jpg

Replication Goal

 * Instead of copying the Previously Improved Model, improve its features for the New BristleBot Model 4
 * Use household or cheap materials

Previous Problems

 * After a short duration of its activation, the Model moves in a off-course, diagonal direction
 * Doesn't maintain its 'forward' motion the whole time
 * Its | Demonstration
 * No creativity in the design still
 * Although it wasn't the intention, Model still lacks its creativity in the design.

Materials

 * $1 material's base
 * $1 material's motor
 * Three brushes
 * Double-sided foam tapes
 * AA Battery
 * Two sets of Velcro
 * Athletic tape
 * Paper clips

Procedure: Improved BristleBot Model 4 (Vids)

 * | Step 1: Bending the paper clips
 * | Step 2: Attaching the clips onto the Model
 * | Step 3: Readjusting the clips to promote the forward motion

New BristleBot Testing

 * The demonstration of the | Version 3

Improvements

 * Compared to that of Version 1 and Version 2, there is a huge increase in its speed
 * The fastest model even with the paper clip attachment
 * Not much of a significant improvement still

More Problems

 * The model still doesn't go in a straight line
 * It spins off into a circular pattern
 * Model's direction couldn't be controlled
 * Speed is fine but the direction movement is not satisfactory
 * Even if the paper clips could be readjusted, there were no trends of forward motion or any improvements
 * Doesn't look too creative
 * No improvements on the Model's external features or creative outlook