Computer Networks/Route/Print

Route is a Windows command that displays and updates the network routing table. These activities will show you how to use the route command to display the local routing table.

Readings

 * route (command)

Preparation
To prepare for this activity:
 * 1) Start Windows.
 * 2) Log in if necessary.

Display Local Routing Table
To display the local routing table:
 * 1)  Open a command prompt.
 * 2) Type route print.
 * 3) Press Enter.
 * 4) Observe the active routes by destination, network mask, gateway, interface, and metric.
 * 5) Close the command prompt to complete this activity.