Electronic Brake Control Systems Diagnosis and Repair


 * Diagnose
 * Poor stopping, Wheel lock-up, false activation, noise
 * Pedal feel and travel, pulsation

Electronic Stability Control System (ESC)
circuits using on-board diagnosis and/or recommended test equipment; determine needed repairs. manufacturers’ procedures. manufacturers’ procedures and specifications; observe proper placement of components and routing of wiring harness. speed, yaw, steering angle, brake pedal position, etc.) and circuits following manufacturers’ recommended procedures (includes output signal, resistance, shorts to voltage/ground, and frequency data.).
 * Observe electronic brake control system indicator light(s) at startup and during road test; determine if further diagnosis is needed.
 * Diagnose electronic brake control system, electronic control(s), components, and
 * Bleed and/or flush the electronic brake control hydraulic system following
 * Remove and install electronic brake control system components following
 * Test, diagnose and service electronic brake control system sensors (such as
 * Diagnose electronic brake control system braking concerns caused by vehicle modifications
 * (wheel/tire size, curb height, final drive ratio, etc.)
 * and other vehicle mechanical and electrical/electronic modifications
 * (communication, security, and radio, etc.).
 * Repair wiring harness and connectors following manufacturers’ procedures.