LaserCutter/AirFilter

Background Info
Put information on model, serial number, possibly a manual link here also mabye a packign list of the original parts

could separate it out as a different wiki

Warnings

 * Start the air filter before powering up the laser
 * After powering up, confirm that the motor is actually running. If it is not, check the input selector switch on the back of the machine. It should be set to "0."
 * Use the minimum airflow necessary for the cutting job, because higher air flow reduces filter life
 * Disconnect the unit from AC power before opening/servicing

Quick Start Guide

 * Confirm that connections are tight by attempting to twist the hoses. The hoses hould not move.
 * Set the air flow knob to minimum, all the way to the left.
 * Press the green button to power up the unit
 * Confirm that the filter motor is actually running. If it is not, check the switch on the back of the machine. (see above)
 * Adjust the air flow to the minimum necessary to remove the fumes, in order to preserve filter life

Detailed instructions

 * More information is available in the manual, available from John, Scott, or Keith

Next Steps

 * add links to photos of major controls
 * add a section on theory of operation, augmented with pictures of the inside of the machine
 * look into the possibility of uploading the manual (would doing so be legal/ethical?)