MakerBot/Tutorial on Blender

Building STL files in blender and printing them

 * 1. Go the computer near the makerbot
 * 2. Go to "my computer"
 * 3. Click on local Disk (C:)
 * 4. Open the "Program Files (x86)"
 * 5. Open Blender Foundation
 * 6. A cube will appear
 * 7. Delete the cube unless you are making a house
 * 8. Go to "add" in the upper left hand corner
 * 9. Click "Mesh"
 * 10. Add the geometric shape you want. (Icospheres are good).


 * 11. Design it the way you want.
 * 12. When done with the geometric shape save it as an STL file.
 * 13. Go to file then export and click on STL file
 * 14. Name it and for convenience save it to the Desktop.
 * 15. Open Replicator G
 * 16. Open your file in Replicator G. (If it be big and you want small go to scale)
 * 17. Go to control panel and Click 180 to target temperature and from the Panel temperature type 110 (This will take a couple of minutes, faster if you can type fast though).
 * 18. Generate the Gcode
 * 19. In the Gcode tab replace "S 220 T" to "S 180 T"
 * 20 Click on build
 * 21 Go to the room with the makerbot
 * 22 Now wait for 7 or 100 minutes or so
 * 23 IF YOU MADE A HOUSE YOU SHOULD BUY A DOLL