Power Supply Testing/Testing if the power supply does not work

Testing if the power supply is not working

 * 1. Get the power cord Power cord.jpg
 * 2. Connect the power cord to the power supply Get the power supply.jpg
 * 3. Get the multimeter Get the multimeter.jpg
 * 4. Turn the multimeter on to 20 Turn the multimeter on.jpg
 * 5. Place the black cord of the multimeter in the G binding post
 * 6. Place the red cord in the 3.3 volt (if the voltage is not 3.3 it is not working) Voltage on 3.3.jpg


 * This power supply does not because the voltage of 3.3 is 0