Power Supply Testing/Testing if the power supply works

Tutorial on testing if the power supply is working

 * 1. Get the power cord Power cord.jpg
 * 2. Connect the power cord to the power supply Get the power supply.jpg
 * 3. Get the multimeter Get the multimeter.jpg
 * 4. Turn the multimeter on to 20 Turn the multimeter on.jpg
 * 5. Place the black cord of the multimeter in the G binding post
 * 6. Place the red cord on the 3.3 volt (the number may be +-2volts) Testing the 3.3 volts.jpg
 * 7. Place the red cord in the 5 volts (the number may be +-2volts) Testing 5 volts.jpg
 * 8. Place the red cord in the 12 volts (the number may be +-2volts) Testing the 12 volts.jpg
 * 9. Place the red cord int the -12 volts (the number may be +-2volts) Testing the -12 volts.jpg
 * The power supply works