Power Supply Testing/Tutorial on how to put the cables together


 * 1. Get a Power supply.
 * 2. Remove the screws.
 * 3. Shorten the wires.
 * 4. Join the wires by colors (Only the yellow and white should be put together)
 * 5. Tape them with electrical tape. Cables_fixed.jpg
 * 6. Start stripping the wires. Wires_in_the_power_supply.jpg
 * 7. Get a long wire of the each color.
 * 8. Link it to the corresponding color.
 * 9. Tape it with electrical tape.


 * Doing this will allow the soldering job easier.