User:Adelelfrih/ENES100/project3

Week1 Narrative

 * Switched to the Music Project from the ECU Project.


 * Have been assigned to work on the physical Plexiglas board.


 * It was not much of a challenge to cut the big plate for the board. Cutting the boards was a challenge because the width was only one inch and it was 1/4 inch in diameter.

The board 13in by 11in
 * The Dimensions -

The runners 13in by 1in

Week2 Narrative

 * Next have to glue down the running boards on the large board.

How to use Acrylic Glue
 * Will use Acrylic Glue to do this process.
 * Video found below, looks like we need extra materials


 * 16 Gauge Syringe
 * Clear bottle with needles


 * This is the brand where we will buy most of our supplies (Tapplastics)- If we refer back to the video above.
 * MSDS For Arcrylic Glue by Tapplastics