User:Asadabbas/Asad Gillani/ENES-100/Project 2: Bicycle turn signal continued

Week4 Narrative
in week 4 we wanted to make a very basic prototype to able to show what we had accomplished thus far.

at this moment we had ordered supplies including Bright Yellow LEDs, and new wires. and we were still waiting on supplies to continue to upgrade out prototype.

Week6 Narrative
For week 6 we took everything that we had and started to build on, on current prototype which consisted of a series or LEDs on a cardboard box. We wanted to recreate this set up but slightly refine it more to make it more presentable for seminar. We replaced all the wires by soldering a new set of wires. and re purposing a plastic box we found lying around. We used a Clear box an made some adjustments to it to meet our requirements. First we opened up the compartments to make larger spaces so we could place the arduino, battery, all the wiring, and a breadboard of the turn signal. these spaces worked well because they were purposely made so that the insides would not move around too much inside the box. Next we drilled holes inside the lid pf the box to make spaces for the LED light to go through the box. we also decided to keep the Lego pieces to keep the LEDs in place.