User:Dorion.mitchell/enes-100/project 2

My Instructor's user page which points to this.

Week1 Narrative

 * My objective for this week was to build a wall for the TV mount to be mounted onto (We cannot mount the TV into HCC's wall)

Next Steps
 * Mount the TV mount to the Newly built wall.
 * Ensure that it is level
 * Make a TV mount out of wood.

Week 2 Narrative

 * My task for this week was to determine weather or not the T.V. mount will flip and tip over once the Mount and the TV are placed on it.

Next Steps

1. Install the TV mount on the new wall. (Will be done on Tuesday)

2. Clean up our presentation so that we will be ready.

2. Purchase linear actuators

3. Take down one of the TV's in 158

Week3 Narrative

 * My task for this weekend was to assemble the TV mount and attach it to the Wall that I built.

What I did


 * Here is a demo of the TV mount's fluent movement.

Next Steps
 * Figure out where linear actuators will go exactly.
 * Make mock linear actuators out of small pieces of wood.
 * Find out exactly which actuators that we are going to use.

Week 4 narrative

 * My task for over the weekend was to research linear actuators and finalize which ones that we will need.


 * Here are the links to the actuators we will be purchasing..

- Here is a larger linear actuator that we would be able to use for the forward and backward motion.

- Here is the smaller linear actuator that we are going to use for the back and forth tilting motions.


 * Next Steps

1. Create a track that the actuator will be able to slide back and forth on on the tv mount. 2. Decide and draw where we will put both of the actuators. 3. Finish up this project