User:Emabit17/ENES-100/project 2/Week 4 CDIO

Problem Statement
Take apart the joystick to and figure out the wiring and their purpose. Research the product and its functionality

Work Flow

 * Company: Invacare
 * Model Number: 1107267
 * Serial Number: 08D111669

For this first week of the new project cycle, I am working with the joystick of the wheelchair to understand its wiring and programming. The purpose is to familiarize myself with the wiring so it would be easier to program it with the Arduino. The wiring is not very complex, one can figure out what the wires do pretty easily just by observing. However connecting every wire to an arduino and programming it would be a different challenge.

This is the Joystick Manual from the invacare website.

Work Flow
This a table of what each of the wiring actually does and its starting point to end point


 * Company: Invacare
 * Model Number: 1107267
 * Serial Number: 08D111669

The wiring was hard to decipher. I was not able to proceed past the arduino programming because I was unable to know which wires connect to the arduino.

Steps
The next step is to test the joystick with the arduino and start the programming of the joystick to light up the LED