User:Emoney1995/ENES-100/project 3

Week0

 * Solve battery holder problem, assemble robot that is in pieces my main focus on this project.

Week1

 * The problem was that not all of the positive and negative charges on the battery pack had a voltage measurement or link when i was using the Multimeter. The way i found that there was a problem was by using the Multimeter to check and see what positive and negative points have a connection with eachothe and which ones do not. Each positive and negative point had there own partner. i found that one of the positive prongs on the battery pack had some corrosion on it and that seemed to be what the problem was. My partner then removed the corrosion of with her finger nail, in which it fixed the problem and allowed a voltage measurement to come through and make my search for all of the connection points a success.


 * For the past week I have been attempting to figure out the problem with the battery cartridge and figure out if there is a pattern between each negative and positive circuits in the cartridge. The battery pack consist of 8 batteries which possibly are equivalent to about 12 volts.


 * This picture below is a diagram of how the battery pack looks.

week2
Through the past week i had the task of reassembling the WowWee Tribot back together. this process took me much longer then i had expected such because of the fact that i was having to keep assembling and disassembling the robot many times. Often i ran into some stumps such as: Once i corrected all of those mistakes, i finally was able to put the body portion of the Robot back together. The only thing that i have left to do is putting the head back on and connecting all of the wires.
 * Wrong screws in certain places
 * wires were not placed right
 * Pieces were not fitting together
 * Forgot to screw certain places.

these are the screws that i used for the bot

Week3 Narrative
and weeek 2
 * Updated Week 1

Week4 Narrative

 * Bulleted list item
 * Bulleted list item
 * Bulleted list item