User:Givememyusername/ENES-100/Project 3

=Project 3= -Access Control

Here is the associated /CDIO/ page.

Week 1
I began the removal and salvaging of a input mic jack on a Motorola cell phone. The input jack is going to used to allow the use of a throat mic on an Arudino. Here is the associated /CDIO/ page for the Cell phone disassembly. After the input mic jack was removed and salvaged. I attempted to attach the jack to the Arudino and failed, Dylan Gormley then gave an attempt and also failed. A missing resistor was thought to be at fault following these instructions. This attempt also failed. After further research Dyan and I came to the conclusion that an amp must be installed for this specific mic to work. These following schematics and instructions will be followed for the installation of the amp.
 * Next step

Week 2
The installation of the throat mic became more complicated then I thought the installation failed. The rest of the installation was given to Forester. A mount has been created for the knock knock motor.

Week 3
I worked on creating a new method of opening the door and a new method of mounting the motor to the door.

Week 4
AC Motor repairs are needed so testing of the gear arm can began.