User:Gvsqz/ENES-100/Project 1

Week0 My First Task
Three personal preferences:
 * 1. Quadcopter
 * 2. Access Control
 * 3. Ram

Week1 Narrative
Determined the time required to set up inflatable obstacles. Inflated the hoop and pylons, filled the bases with water, determined whether they could remain upright. Two of the obstacles have leaks, require patches. Watched tutorials on piloting the Quadcopter, took several test flights. Presented at the Howard Community College Engineering Week fair in the Galleria. Received permission from campus security to fly the Quadcopter with a height limit of three meters. Piloted one Quadcopter using the A.R. Freeflight application on an Android device. Here is the associated /CDIO/ page.

My Second Task
Develop an operations manual for the quadcopter.

Week2 Narrative
Developed an operations manual for the quadcopter. Here is the associated /CDIO/ page.

My Third Task
Fix broken legs on a central cross for the quadcopter.

Week3 Narrative
Attempted to fix the legs on the central cross of a quadcopter. The central cross has four legs, and three of them are broken, rendering it unusable. Searched Thingiverse for parts that could be used to fix the central cross. One design was chosen for the legs and one design was chosen for the central cross itself. The central cross is susceptible to breakage and adding a central cross piece enhances its durability. The MakerBot 3D printer was used to create the legs and the central cross piece.

/Making central cross parts/

My Fourth Task
Attach the legs and the central cross piece to the central cross.