User:Gvsqz/ENES-100/Project 2/Attaching motor onto mounting piece

Problem Statement
Attach the motor onto the mounting piece.

The Design
Two team members worked on this project, Gvsqz and Carlos6913.

The mounting piece was designed to be used along with ratchet straps. As such, a drill press was used to drill four holes on all four sides of the piece. The hooks can then be attached to the mounting piece.

The mounting piece also needs to support the motor. The motor was attached to the mounting piece with five bolts. Using a compact drill, five holes were drilled into the mounting piece. The motor was then attached and secured with bolts, hex nuts, and washers.

Next Steps
The next step is to attach the arduino and the throat mic onto the mounting piece, and to attach the mounting piece to the door using ratchet straps.