User:Horizon1992/Group Printer Project

Week0 Preferences
We got assigned a project of deconstructing the printer and looking out for parts that we know of and describing if those parts can be used again for any other future works.

Week1 Narrative
'We were assigned our project 0 we research different part of printer before we started to deconstruct it, as if any problem or any injury happens we are able to go back to that part and take a look of how to avoid those injury and work our way out carefully. This is extremely necessary as no one wants to get injured and stop working. Taking precaution should be the first step towards and kind of work.

Week2 Narrative
''In the beginning of the week on Monday we were given more instruction on how the class would operated and what is expected of us in the class. Wednesday we were assigned our project 0 started of by research the different parts of the printer such as Fuser,Rear output bin, Dust cover, Memory access door, and Toner cartridge access

Week3 Narrative
''1.Before we disassemble the printer we discussed which panels should taken apart in order to take out from needs to be removed from the inside 2.We started off by removing the Fuser(removes paper jams)and dust cover from the back which allowed us to the find the ink cartridge and fan after finding these to parts we took picture of them from different angles 3.Then we remove the memory access door and by doing that we found a nob that could potentially be a part that assets the Fuser and allows paper to come out of the machine 4.Next we started to remove the top cover to see which screws and bolts need to be removed in order find reusable parts from the inside ''

Week4 Narrative
''Tell a detailed story describing what you did for your team over the first weekend. Link to any wiki pages you edited, videos created. Upload any pictures taken. Compare your task with what you actually did and write what you feel are the next steps.''