User:Jchism4804/ENES-100/Project 0

Week1 Narrative
Once this project was first given to us I had thought as many did about how to make a 3d working model ,yet I had asked myself why did it have to be 3d? So, I designed a to functioning model using paper and staples. Also I, using the online model as a guide I placed values upon the static limbs of my model in relation to the lengths given in the demo.

My Second Task
With the concept of 2d models in mind and simple and cheap materials I used the measurements that I had gathered and found a useable scale in which to apply the limb sizes. Then cut the limbs to size and numbering them in accordance to the locations.

Week2 Narrative
During week 2 I had started the process of attaching the limbs together with the staples, using only one side of the staple to get movement on one axis. With this came some trial and error work. finally the joints were coming together until the point of a completed body without the 3 static points fastened to the cardboard. Then with the 3 points tacked into place the project was almost complete. with a slight drawback of the limbs being too flimsy and not moving properly.