User:Kshew12/ENES-100/project 0: Inkjet

Week0 Preferences
1: Igloo, 2: Biofeedback, 3: 3D Scanner, 4: Power Supply, 5: SDR

Week1 Narrative
With the free will of having any goal I want for Projet0: Inkjet, I discussed with the teammates of making a moving printer.

After removing some of the unnecessary parts, I observed 3 motors that could be used for the source of energy to move this Inkjet.

General Overview of the printer:

Week2 Narrative
Continuing on with making a moving printer, there were many things to do and decide. My teammates and I shared the work since not all of us were able to make it in a specific time point. I am not good at wiring so I mostly focused on the designing the moving system and removing parts that I do not need. My primary work included:
 * Tested motor's strength so that I can be sure that it is strong enough to move this some what heavy object and it seemed like its very strong!
 * Designed out where I was going to attach the 3 wheels and placed it on the printer (2:1 Triangular formation).
 * Finished removing all the unnecessary parts on the printer while keeping all the required printing functions.
 * Tried to link the paper feeding motor and one of the wheels with a nylon string so that it loops around(Having problems with this portion).

Week3 Narrative
''Tell a detailed story describing what you did for your team over the first weekend. Link to any CDIO documents you are working on that need to be considered for project points. Compare your task with what you actually did.''

Week4 Narrative
''Tell a detailed story describing what you did for your team over the first weekend. Link to any CDIO documents you are working on that need to be considered for project points. Compare your task with what you actually did.''