User:Mcyr1793/enes100/mywork2x2

Write problem/project Goal
Assemble a power resistor testor

My First Task
Accumulate materials necessary for the project.

Summary of actual work over first weekend
I was on a different project this week

Week1 Narrative
Tell a detailed story describing what you did for your team over the weekend.

My Second Task
Record what you are planning on doing for the team during the second weekend.

Summary of actual work over second weekend
I was on a different project this week

Week2 Narrative
Tell a detailed story describing what you did for your team over the weekend.

My Third task
Record what you are planning on doing for the team during the third weekend.

Summary of actual work over third weekend
I was able to mount a wooden board to the metal shell of the power resistor tester.

Week3 Narrative
I drilled holes into 10x8 inch wooden block and hot glued the block to the plastic pegs on the metal shell.

My Fourth task
mount circuit, heat syncs, and green power resistors.

Summary of actual work over fourth weekend
I was able to mount everything except for the circuit. I still need to make the circuit; the thing I need to figure out is how to get the circuit assembled on a bread board that would fit on the wooden board; or at least find one that would fit somewhere in the metal shell.



Week4 Narrative
I decided to hot glue the heat sinks onto the wooden board. We will see if it melts or not when the heat sinks get hot. I had some problems getting the screws into the wood for some reason. I assumed that there was something wrong with the wood. A day or so later though it worked and I was able to mount the power resistors.

Complete Team Page
Fill out the Team Form (should have already copied the form, created the team page, linked to it and started filling it out).