User:Mkamara9540/ENES-100/project 1

My Instructor's user page which points to this.

Week1 Narrative
my task for this week was to get arduino's talking to each other through can bus. I first installed arduino software on my computer.

I went through some several steps learning how arduino works, such as verifying/ compiling files, and learning some components on arduino's motherboard. next steps:-Start up the Arduino software -applying some codes -compiling and verifying files

Week2 Narrative
my task for this week was to get arduino's talking to each other through can bus.

I first installed arduino software on my computer.

https://upload.wikimedia.org/wikipedia/commons/thumb/2/28/Arduino Uno 005.jpg/120px-Arduino Uno 005.jpg

Arduino Uno

I went through some several steps learning how arduino works, such as verifying/ compiling files, and learning some components on arduino's motherboard. next steps:-Start up the Arduino software -applying some codes -compiling and verifying files

Week3 Narrative
arduino and Can Bus worked successfully when I set it up on my computer both lights on arduino/Can Bus shield #1 and 2 stared lighting up at the same time on (rx and int) set arduino/Can Bus #1 to send data and #2 to check receive set the baudrate to 115200, magical data started running in the COM15 arduno/Can Bus didn't work the second time on my experiment NEXT STEPS: reset arduino and have it working with Can Bus Figure out where to find devices that carry Can Bus

Week4 Narrative
task for the weekend -learned the steps of how arduino and CAN BUS communicate -upload video of arduino and CAN BUS talking -work on presentation for the seminar