User:Nathanhall78/ENES-100/Project3

Week1 Narrative
For week 1, I accomplished the following:
 * 1) attached the two external power connectors to the testing chassis;
 * 2) cut and bent copper ground wire for the external power;
 * cut, bent and soldered grounding wire from fuse to transistor 2;
 * 1) shortened, de-soldered and re-soldered the orange and black wires on the two potentiometers attached to chassis front

The associated /CDIO/ page.

Week3 Narrative
For week 2-3, I accomplished the following:
 * 1) drilled out a mounting hole
 * 2) mounted the meter on the power supply chassis
 * 3) drilled out the external power supply ground
 * 4) attached the ground wire to the chassis.
 * 5) performed preliminary test of power supply tester
 * 6) re-drill transistor mounts on heat sink

Here is the /CDIO/

Week4 Narrative
''Tell a detailed story describing what you did for your team over the first weekend. Link to any CDIO documents you are working on that need to be considered for project points. Compare your task with what you actually did.''