User:Nathanhall78/ENES-100/Project3/CDIO

Problem Statement
Complete physical build of power supply/battery tester

Design/Build Process

 * 1) Attach external power supply terminals (ground/black and hot/red) to tester chassis
 * Cut, bend, and attach grounding wire from ground terminal to chassis body
 * 1) *Drill grounding screw hole to attach grounding wire to chassis
 * 2) Attach hot wire from terminal to fuse
 * Cut, bend, and attach current supply wire from fuse to resistor
 * 1) Drill opening for meter attachment
 * 2) *Attach meter and wires to ground and hot current source

Materials

 * Grounding wires
 * External power supply terminals
 * Grounding screw
 * Meter

Testing
After completion of physical chassis, a variable power source was connected to the tester.
 * 1) Prior to physical test, CircuitLab simulation run on tester