User:Ramiseif7/ENES-100/project 1/CDIO/DC Motor Control Tutorial

Below is one of the simplest ways to get a small motor to function. This first tutorial will spin a small DC motor on and off for a repeated amount of seconds in one direction. All you need is... -Arduino/ Usb cable -Small DC Motor (less than 5v) -2 wires Step 1 Connect one wire to any pin # (in this case pin 10) Step 2 Connect the second wire to GND Step 3 attach the two wires to the leads on the motor (it dosnt matter where + and - connect to the motor)