User:Steven1108/ENES-100/project 1/Week 3 CDIO

Problem Statement
Connect the EL wire to the wire that will connect to the circuit board.

Designing the Implementation Process
After successfully finding the best methods of connecting and insulating the EL wire, the next step was to connect all the EL wire to the adapters allowing it to connect to the circuit board.


 * It is important to make sure you do not use too much solder or it will be too heavy to stay on the thin EL wire.
 * Another problem with too much solder is that it restricts the thin heat shrink to fit around the wire.
 * It is important to make the connection using as little solder as possible, the heat shrink will hold everything together tightly.

Next Steps
Next steps are to talk with the instructor to find next tasks