User:Tknbeez/ENES-100/project 1

Week0 Task

 * My project preferences: Costume,Toy, Wheelchair, Rube Goldberg
 * What is your task over the first week end of the project?

Week1 Narrative
The goal is to build a speed control motor for the Flying Ball project. First step is to figure out how the motor work by looking at a wind tunnel as an example. Here's the link to my /CDIO/ page

Week3 Narrative
_ESC and motor were to big. Wires melted between the PC power supply and the ESC. Switching to a smaller setup using the thunderbird 9 ESC. Going to follow old documentation. Here's the link to my CDIO page

_ Switch to work on a Trick R/C Zagi 5 motor. Taking the motor home. Also took home another motor and test to see which one is better for the dragonball. Here's the link to my CDIO2

My Fourth task
In the Forth week I would try to figure out which motor should be used and what kind of materials to hold the motor inside the ball and how to attach them well.

Week4 Narrative
Final CDIO page of what I've done in case any future group needs informations