User:Wsnyder0080/ENES-100/project 3/CDIO page

Problem Statement
finish respective parts then combine each part.

Designing the Implementation Process
each part is designed to work together with one setting off the next.

parts function
part 1 is the first part to be activated. a force will move a steel ball bearing, represented by the black circle in the diagram, which will roll down each incline until it falls in to the cup on the seesaw and activates part 2. the weight of the ball in the cup will force the left side of the seesaw down and the right side up thus triggering part 3. The right arm of the cup seesaw with swing upwards and knock the hammer arm out of balance frocing the left side of the arm up and the right side down triggering a future part.

Rather than buying the clamps, and the bolts and nuts from the market, it was decided to print them on the makerbot. To do this, the basic designs were downloaded from the thingiverse and then the size/dimensions of the objects were changed using the softwares.

Next Steps
combine all three of the parts, mount them on a vertical surface them begin testing procedures to discover if any changes need to be made to design.