User talk:Esmith1993/enes100/fanwing

10/0/0 nothing for fanwing committed to over the weekend 1sfoerster 20:52, 19 September 2011 (UTC)

10/5/0 no peer review, no narrative, please delete instructions if you are not going to follow them in the future, do not talk about blueprints or drawings without links to them 1sfoerster 18:46, 26 September 2011 (UTC)

Eric really showed keen interest in finding ways to control the fanwing. He got the controller for the fanwing from one of the scrap airplane which could be used to steer the fanwing. W 18:25 26 September 2011

Eric had a great idea to use old computer fans and use them in the squirrel cage to create lift for the fanwing. M 21:07 02 October 2011 (UTC)

0/0/0 ... nothing posted here 1sfoerster 18:40, 3 October 2011 (UTC)

10/10/0 .. good .. get started .. 1sfoerster 17:35, 11 October 2011 (UTC)

Good job explaining how we will be able to maneuver the fanwing and where we will place the electronics. M

18:34, 16 October 2011 (UTC)

10/10/10 ... see me about the motor ... need to control motor with arduino ... I can see the electronic speed control .. need some more documentation ... like name of parts, source of parts, part cost for more pushing project forward points 1sfoerster 20:04, 17 October 2011 (UTC)

Well done and best of luck for building the cage. Waleed 23:00 11/6/2011

Erik worked on the motor and was pretty successful in figuring out its mechanism and how its going to be placed and would work in the Fanwing. Waleed 12:50 23 October, 2011 (UTC)

Erik, brought up the idea to slant the wing at a degree so the wing sticks out more. He also soldered the wire for the electrical wires together for the steering mechanism. DO you think you can get the steering mechanism working by next week? Mirza 20:25 23 October 2011 (UTC)

10/10/5 .. not clear what gathering materials has to do with blueprint .. if you created a drawing, upload it and link to it, shoot a screen shot of it .. create instructions if you are learning something 1sfoerster 18:43, 24 October 2011 (UTC)

Just letting you know that not much was done on Wednesday so you didn't miss anything. We have alot of work to do. Mbaig7172

Good job explaining how the wing would fit and what materials would be needed to create the wing.Mbaig7172 October 30 2011 22:20 (UTC)

Good job for helping us figure out the body shape and its structure.

0/0/0 .. no week 2 to grade 1sfoerster 19:37, 31 October 2011 (UTC)

Good idea to use the old styrofoam plane as the body of our fanwing.

Mbaig7172 22:40 6 November, 2011 (UTC)

Well done and best of luck for building the cage. Waleed 23:00 11/6/2011

10/10/0 .. just see a report on a team decision, but no information to back up the decision 1sfoerster 20:27, 7 November 2011 (UTC)

I know you were absent but all we did was individual assignments. We did not have much time to work on project in class.

Mbaig7172 10:19 13 November 2011 (UTC)

Good job for putting your effort in this project. Waleed 22:10. 13 November, 2011

10/10/5 ... I made ... ?? no drawing, no pictures, nothing physical .. no idea what you are doing 1sfoerster 21:49, 14 November 2011 (UTC)