User talk:Garcia123/ENES100/My Work 2

week 1 p 2 grading 1sfoerster (talk) 13:03, 28 March 2012 (UTC)
 * 10/5/0 .. need positive comments on team mates pages ...

Week 1 p 2 feedback David Ross
 * Martin I love the more hands on approach to the project this time around. The MPGuino is very narrow enough to get done within the 4 weeks and has a lot of potential to open up other projects for engineers

Week 2 pt 2 feedback David Ross
 * Martin if u needed smaller screwdrivers to take apart the printer component, just ask we're a team. I have tons of small screwdrivers from taking apart my iphone so many times, but good work not being afraid to ask for help and going to your friend. Thanks to the options with the MPGuino u came up with, I can broaden the project a little by continuing with our car hack 1 project and making both projects an "open end" project for engineers where then it becomes a game. I'll talk to u about this in class. By the way, when soldering just disconnect the flat cable connected to the printer screen from the printer hardware by melting down the back side of the flat cable connected to the hardware and just pull it apart then use a small metal wire used for soldering to connect wires to the cable once removed from the hardware. If you need anything u have my number. Have a good break. Good Luck.

Week 2 feedback Kimberly DelVillar-- Martin has been very into this project and now I think things are getting a little bit more complicated and intense with what he has to do and I think he is doing a good job with staying grounded in that and being focused.

Week 3 feedback Kimberly DelVillar-- I really would like to see how the soldering has been coming along because I remember you told me that was what confused you the most so I'm sure that as soon as that's done you will get the LED screen to work so I'm very excited to see everything come together now. Good job on the effort you are putting into this.

week 2 p2 grading
 * 10/10/30 ...keep trying

week 3 p2 grading
 * 0/0/0 .. nothing to grade

Week 4 pt 2 feedback David Ross
 * Way to use others tutorials to try and figure out how to solder the LCD screen to the arduino. Im sure you're not the first to encounter problems like this so using and finding others projects with the same problems to help your own cause is great. Keep up the hard work.

Week 4 feedback Kimberly DelVillar-- Good job on trying to get the LED to work, although it didn't I know you put effort into it.

week 4 p2 grading 1sfoerster (talk) 14:07, 18 April 2012 (UTC)
 * 0/10/20 ... photos too small to see any detail that is worth while ... from looking at your work, you need to unsolder the display from the circuit board ... this is one source of problems ... each solder needs to be covered in shrink wrap so they don't touch each other ... since you are learning a lot, there should be lots of drawings and discussion in your notebook, but I don't have a notebook grade for you this week