User talk:Slarkin0077/enes100/project3

Hey! I found the valve that we need for the existing project on amazon, and will be ordering it tomorrow. Hopefully, we will have it by Wednesday. In the mean time, I suggest that we start working on the smaller version if that is what we are going to do to expand the project. I think that we could try it using two 1/2" brass swing check valve. I will pick another one up from the hardware store. I have pretty much everything else that we will need for it in my car. Timothyrfries (talk) 23:52, 18 November 2012 (UTC)

so I wasn't able to find the return valve, but i hope you were able to ask your friend about the other parts. --Halima (talk) 23:55, 18 November 2012 (UTC)

i was able to cut the pipes with a hex saw. now we just have to glue them together. --Halima (talk) 21:55, 25 November 2012 (UTC)

week 1: 0/0/0 week 2: 0/0/0 --Medelen8 (talk) 01:46, 30 November 2012 (UTC)

We began to glue the small ram parts together today. --Halima (talk) 1:55, 26 November 2012 (UTC)

The big ram did not work when it was tested. The small ram needs to be still tested. --Halima (talk) 21:07, 2 December 2012 (UTC)

week 3: 6/6/10 Minimal work documented. Wrong week filled out. --204.126.132.241 16:23, 3 December 2012 (UTC)

I finished the decision matrix and poster. it should be posted on the team page soon. --Halima (talk) 21:53, 9 December 2012 (UTC)

week 4: 8/6/20 --Medelen8 (talk) 18:40, 10 December 2012 (UTC)